• National Clamps
    • Over 95% market share for Lifting clamps in Korean Shipbuilding Industry
    • Over 35 years of proven safety history in Korean shipbuilding industry
National Clamps

PRODUCTS

  • Dismantling Vertical Clamp

 
 

Products Dismantling Vertical Clamp
Model NVC-LB
Manufacturing Origin South Korea
Factory Busan, Korea
 Description

    A Vertical lifting clamp for steel plates and various steel blocks.

NVC-LB

WLL(TON) Jaw Opening A1 A2 B C D1 D2 E F ØG I J K Weight(kg)
3 0-35 40 5 58 196 36 50 128 368 55 19 43 73 13.0
5 0-40 50 6 56 225 41 52 142 420 60 22 45 81 17.4
No. ASS’Y NAME No. PART NAME No. ASS’Y NAME No. PART NAME
1 BODY - - 5 CAM BOLT & NUT - -
2 SHACKLE - - 6 JAW ASS’Y 6-1 SWIVEL JAW
3 SHACKLE PIN - - 6-2 BOLT & NUT
4 CAM ASS’Y 4-1 CAM 7 LEVER ASS’Y 7-1 SAFETY LEVER
4-2 LINK 7-2 STOPPER ASS’Y
4-3 SPRING PIN 7-3 BOLT & NUT
4-4 RIVET PIN 8 LOCK SPRING - -

[Features]

  • Due to the safety lever, the NVC-LB is convenient to use and also easy to separate the clamp after working with thick steel plates.  Since the lever is attached to the inside of the clamp, there is a lower possibility of damage by the mid-air collision of clamps.
  • Even for a high working place, it is easy to separate the clamp from the ground by connecting a rope to the safety lever.

[How to use]

  • Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
  • Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.
  • When pulling the rope to release, pull it lightly with wrist snap.

[Warnings]

  • Do not exceed the rated capacity specified on the clamp.
  • Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
  • Never lift two or more work pieces with one clamp.
  • Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of the safety lever.
  • When lifting a work piece, a signal man must be outside the roattion radius of a work piece to send a signal to a crane operator
go top button