• National Clamps
    • Over 95% market share for Lifting clamps in Korean Shipbuilding Industry
    • Over 35 years of proven safety history in Korean shipbuilding industry
National Clamps

PRODUCTS

  • Turnover Clamp

 
 

Products Turnover Clamp
Model NVC-LPS
Manufacturing Origin South Korea
Factory Busan, Korea
 Description

    A lifting clamp only for turning over(at 180°) steel plates and various steel blocks.

NVC-LPS

WLL(TON) Jaw Opening A1 A2 B C D1 D2 E F ØG I J K Weight(kg)
3 0-20 25 5 62 188 40 47 125 355 55 19 43 73 12.5
5 0-40 45 5 75 240 62 52 150 436 58 22 50 90 20.4
0-50 55 5 75 254 62 62 150 452 58 22 50 90 22.9
8 0-40 45 5 80 265 72 58 160 498 70 28 58 102 31.5
0-50 55 5 84 278 72 63 160 508 70 28 58 102 32.5
0-60 65 5 86 292 72 65 162 520 70 28 58 102 33.5
30-70 75 5 88 312 72 68 172 556 70 30 60 104 39.0
40-80 90 5 90 330 72 74 180 568 70 30 60 104 41.1
10 0-50 55 5 84 293 70 70 180 540 70 30 59 107 42.0
5-60 65 5 48 302 70 70 185 547 70 30 59 107 43.3
50-90 100 5 95 355 74 78 190 616 75 32 68 116 53.3
50-100 110 5 100 374 75 85 202 628 75 32 68 116 57.7
12 5-70 75 5 92 316 73 67 167 550 70 30 68 120 46.5
8-40 45 5 95 295 70 62 170 558 75 36 75 131 49.7
8-60 65 5 100 322 72 68 178 568 75 36 75 131 56.0
No. ASS’Y NAME No. PART NAME No. ASS’Y NAME No. PART NAME
1 BODY - - 6 PAD ASS’Y 6-1 PAD
2 SHACKLE - - 6-2 BOLT & NUT
3 SHACKLE PIN - - 7 LEVER ASS’Y 7-1 SAFETY LEVER
4 CAM ASS’Y 4-1 CAM 7-2 STOPPER ASS’Y
4-2 LINK 7-3 SPRING PIN
4-3 SPRING PIN 7-4 ROLLER
4-4 RIVET PIN 7-5 SPRING PIN
5 CAM BOLT ASS’Y 5-1 BOLT & NUT 8 LOCK SPRING - -
5-2 SPRING PIN

[Features]

  • A special lightweight clamp with a safety factor of 3. The NVC-LPS is convenient and fast to turn over an enlarged plate  by butt welding steel plates at shipbuilding plants of shipyards.
  • The NVC-LPS has the large pad instead of a jaw in order to minimize the sway of a work piece when turning over it.
  • Due to the safety lever, the NVC-LPS is convenient to work with and easy to separate the clamp after lifting thick steel plates.
  • After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.

[How to use]

  • Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
  • Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.

[Warnings]

  • Do not exceed the rated capacity specified on the clamp because the NVC-LPS is lightweight with a safety factor of 3.
  • Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
  • For the turnover clamp, it is safe to use sling chains rather than wire ropes. Use chains of the same length. Ensure that the angle of the chain is vertical to the ground.
  • When lifting work pieces, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator
go top button