• National Clamps
    • Over 95% market share for Lifting clamps in Korean Shipbuilding Industry
    • Over 35 years of proven safety history in Korean shipbuilding industry
National Clamps

PRODUCTS

  • Wire Clip

 
 

Products Wire Clip
Model NWR
Manufacturing Origin South Korea
Factory Busan, Korea
INQUIRY
 Description

    A wire clip that is used to fix tall blocks, such as outside plating and a variety of ship frames, with a wire rope.

NWR

WLL(TON) Jaw Opening A B ØC D E F Weight(kg)
1 8-10 157 80 40 13 16 39 1.5
2 12-14 175 85 45 16 18 45 2.2
3 16-18 205 112 45 18 22 52 3.7
4 20-22 225 125 48 22 26 60 5.3
5 24-26 242 140 48 26 30 68 7.2
6 28-30 270 154 50 30 34 78 9.7
No. ASS’Y NAME No. PART NAME No. ASS’Y NAME No. PART NAME
1 BODY - - 3 SHACKLE BOLT ASS’Y 3-1 BOLT & NUT
2 SHACKLE - - 3-2 R-PIN

[Features]

  • For the NWR, the working length of the rope is freely adjustable because only one end of the NWR is manufactured in the shape of the eye.
  • The inside bottom of the body is curved in S shape. When a specially processed stopper shackle pushes a wire rope with the S-shaped area,  the wire rope is compressed to the inside of the clip so that the wire clip does not slip.

[How to use]

  • Pass the wire rope through the inside of the clip, adjust the length of the rope, and then fix the rope by a ratchet puller.

[Warnings]

  • Do not exceed the rated capacity specified on the clip.
  • Use a rope only of the specification(Ø: Jaw Opening) specified in the instruction manual.
  • Do not lift a work piece with the wire clip.
  • When selecting the specification, consider the weight and the area of a work piece(the load by the wind).
  • Always check the body, the clip, the shackle, the pin for the abrasion and the deformation(widening) and the working condition.
go top button