• Pneumatic Edge Chamfering Solution
  • - STRIPPING Steel plate edge-grinding works automated for improved work efficiency and safety
    - Chamfering work possible for various shapes such as line, curves, etc. and horizontal and vertical position

    • Satifies IMO regulation - PSPC 2R3C
    • Improves productivity
    • - Fast travelling speed 2~3m per minute
    • - One man can manage 2~3 units at same time
    • Improves workshop pollution - cutting not grinding
Pneumatic-Edge-Chamfering-Solution

PRODUCTS

  • Edge Chamfering Hand-Tool

 
 

Products Edge Chamfering Hand-Tool
Model MAN-R-40, MAN-R-70
Manufacturing Origin South Korea
Factory Busan, Korea
 Description

    Best solution for quick and elaborate chamfering for various forms of edges such as lines, curved lines, etc.

  • Easy replacing method of cutter blades
  • Easy to work with small diameter holes (minimum diameter Ø28mm)
  • Same cutter blades used as automatic chamfering machine
  • / R chamfering according to IMO PSPC 2R3C regulation
 Videos

MAN-R-40

MAN-R-70

MAN-R-40(4inch manual chamfering tool)

Size(mm) 210L
Weight(kg) 2.3
Proper air pressure(kg/㎠) 6
Air consumption(㎥/min) 0.6
Screw size of air inlet(inch) PT 1/4
Chamfering size R(mm) 2~4
Minimum working radius R(mm) 14
No-load rotation number(RPM) 11,000
MAN-R-70(7inch manual chamfering tool)

Size(mm) 270L
Weight(kg) 2.9
Proper air pressure(kg/㎠) 6
Air consumption(㎥/min) 0.32
Screw size of air inlet(inch) PT 3/8
Chamfering size R(mm) 2~4
Minimum working radius R(mm) 14
No-load rotation number(RPM) 7,600

 Advantages of using MagSwitch manual chamfering tool

Improvement of process in which the position of chamfering work hole is adjacent to other structures
Before improvement (using grinding bit) After improvement (using 4 inch manual chamfering tool)
  • Sizes and angles of cut surface are not constant (high defect rate)
  • Slow working speed: more than 2 minutes
  • Chamfering with constant size and angle (low defect rate)
  • Fast operation speed: within 5 seconds
Reason for using grinding bits:
Working with grinding bits (burr cutter) as it is impossible to work with manual chamfering tool equipped with conventional large and rounded guide plate in short distance between hole and bottom
go top button